motors, drivers and actuators
(0)
JKBLD1100 1100W Brushless Motor Driver for Arduino & Robotics Projects
SKU: BBZ-MOSTE025• Available on Backorder
₹11505₹8999
Key Highlights
- ✓Can be connected with an external speed display board JKBL01 to show speed and set drive parameters
- ✓ Double speed closed current design provides low speed torque and smooth operation
- ✓ High speed output with a maximum of 10,000 rpm/min
- ✓ Speed control via external PWM and external potentiometer
- ✓ Equipped with EN, DIR, and X1 signal control interfaces
- ✓ Outputs FG signals with optoelectronic isolation (gate output)
- ✓ Outputs ALM signals for user detection with optoelectronic isolation (gate output)
- ✓ Comprehensive protection functions including over-current, overvoltage, undervoltage, fan control, Hall Sensor phase error, and motor stalling protection
- ✓ Environmental Parameters: Cooling Method: Natural air cooling & forced air cooling
- ✓ Environment Condition: Avoid dust, oil mist, and corrosive gases
- ✓ Operating Temperature: 0°C to 50°C
- ✓ Humidity: Less than 80% RH (no condensation, no frost)
- ✓ Vibration: < 0.5G (4.9 m/s²) at 10Hz-60Hz (non-continuous operation)
- ✓ Reserved Temperature Range: -20°C to +65°C
- ✓ Size: 150mm x 97.5mm x 53mm
- ✓ Weight: Approximately 0.55 kg
1
Delivery1 – 11 Business Days
Check Delivery
Enter your 6-digit PIN to check COD & estimated delivery.
Safe Checkout
UPI
Earn 920 Bits
≈ ₹920 cashback on this order
Free Shipping
Ships in 2–3 business days
Secure Checkout 5-Day Returns Store Pickup · Pune Same-Day · Pune
Power Supply
AC 80V - 220V DC (capacity selected according to motor power)
Maximum Input Current
Not greater than 5A (based on motor and rated load)
Maximum Power
Up to 1100W (overpowering motors is strictly prohibited)
Adaptable Motor
Supports motors with output power < 750W
Insulation Resistance
General temperature > 500MΩ
Insulation Strength
General temperature and pressure 0.5KV for 1 minute
Product Includes
1 x JKBLD1100 Brushless Motor Driver (Max 1100W)