5mm Transparent RGB Flashing LED (2-Pin, 5-Piece Pack)
Key Highlights
- ✓Built-in flashing (alternating slow/fast or color transitions) — no external controller needed Only 2 pins (anode and cathode) — simplifies wiring Transparent / clear lens / body for unobstructed light emission Super bright RGB (red, green, blue) internal LEDs Suitable for use with series resistor when supply voltage is above nominal Pb-free / RoHS-compliant manufacturing Available in bulk packs, ideal for hobby, displays, decoration
Enter your 6-digit PIN to check COD & estimated delivery.
Earn 0 Bits
≈ ₹0 cashback on this order
₹50 Flat Delivery
Ships in 2–3 business days
Here are typical or example values (actual values depend on the manufacturer/model)
Parameter Typical / Example Value Notes & Source Emitting Colors / Mode Red, Green, Blue (flashing) Full RGB cycle / alternation Forward Voltage (all LEDs) ~ 3.0 to 3.4 V Many flashing RGB LEDs run ~3.0–3.4 V Adafruit +2 Mouser Electronics +2 Operating Current 10 mA to 20 mA (depending on color / brightness) Example diffused version draws 10–20 mA Adafruit +1 Recommended Resistor Use suitable resistor if supply > ~3 V To limit current and protect LED Flash Mode Color transitions built-in, no external control Programmed inside LED Luminous Intensity Red ~2,000–3,000 mcd; Green ~15,000–18,000 mcd; Blue ~7,000–8,000 mcd From one flashing RGB LED spec Addicore +2 optosupply.com +2 Viewing Angle ~ 100° total (50° half-angle) typical for some milky / flashing RGB LED models optosupply.com Supply / Voltage Tolerance Some versions accept ~3.5 V to 4.5 V DC surplusgizmos.com Operating Temperature ~ −30 °C to +85 °C Example spec from flash RGB LED datasheet optosupply.com Storage Temperature ~ −40 °C to +100 °C Common for LED devices optosupply.com Lead / Soldering Leads standard 2-pin; soldering up to ~260 °C for a few seconds typical From LED datasheet sample