electronic components
(0)
24LC512 I2C Serial EEPROM 512Kbit DIP-8 IC for Arduino, ESP32 & Robotics
SKU: BBZ-EINT030• Available on Backorder
₹124
Key Highlights
- ✓Operates with a single power supply, functioning down to 2.5V
- ✓ Built using low-power CMOS technology with typical active current of 400 μA and standby current of 100 nA
- ✓ Employs a 2-wire serial interface fully compatible with I2C™ protocol
- ✓ Supports cascading of up to eight devices on a single bus
- ✓ Schmitt trigger inputs enhance noise immunity
- ✓ Output slope control minimizes ground bounce issues
- ✓ Compatible with both 100 kHz and 400 kHz clock frequencies
- ✓ Page write operation completes within 5 ms (maximum)
- ✓ Self-timed erase/write cycle ensures efficient operation
- ✓ Includes a 128-byte write buffer for optimized data handling
- ✓ On-chip hardware write protection prevents accidental data overwrite
- ✓ Robust ESD protection rated above 4000V
- ✓ Endurance exceeds 1 million erase/write cycles
- ✓ Guaranteed data retention for more than 200 years
- ✓ Compliant with Pb-Free and RoHS standards
- ✓ Operates reliably across industrial (-40°C to 85°C) and automotive (-40°C to 125°C) temperature ranges
- ✓ High reliability for embedded and automotive-grade designs
- ✓ Compatible with standard EEPROM programming tools.
1
Delivery1 – 11 Business Days
Check Delivery
Enter your 6-digit PIN to check COD & estimated delivery.
Safe Checkout
UPI
Earn 8 Bits
≈ ₹8 cashback on this order
₹50 Flat Delivery
Ships in 2–3 business days
Secure Checkout 5-Day Returns Store Pickup · Pune Same-Day · Pune
Supply Voltage (VCC)
up to 6.5V maximum
Input/Output voltage relative to VSS
-0.6V to VCC + 1.0V
Storage temperature range
-65°C to +150°C
Operating ambient temperature with power applied
-40°C to +125°C
Electrostatic discharge protection (all pins)
≥ 4 kV
Maximum page buffer size
128 bytes
Device density
512 Kbit (64K x 8 organization)
Endurance
1 million cycles minimum
Data retention
>200 years at recommended conditions.