DJI NAZA-M Lite V1.1 Flight Controller with GPS Module for Quad Hex Drone
Key Highlights
- ✓✅ All-in-One Design
- ✓ ✅ Advanced Attitude Stabilization Algorithm
- ✓ ✅ Multiple Flight Control Modes with Intelligent Switching
- ✓ ✅ GPS Module for Accurate Position Hold
- ✓ ✅ Intelligent Orientation Control (IOC)
- ✓ ✅ Failsafe Mode
- ✓ ✅ Low Voltage Protection
- ✓ ✅ Motor Arm & Disarm Function
- ✓ ✅ Supports Futaba S-Bus and PPM Receivers
- ✓ ✅ Compatible with Multiple Multi-Rotor Types
- ✓ ✅ Built-in Gimbal Stabilization Function
- ✓ ✅ Remote Adjustment Supported
- ✓
Enter your 6-digit PIN to check COD & estimated delivery.
Earn 1272 Bits
≈ ₹1272 cashback on this order
Free Shipping
Ships in 2–3 business days
🎯 Basic Performance
🔹 Supported Multi-Rotor Configurations: ✔️ Quad-rotor: I4, X4 ✔️ Hex-rotor: I6, X6, IY6, Y6
🔹 ESC Output Refresh Rate
400Hz
🔹 Recommended Transmitter
PCM or 2.4GHz (Min. 4 Channels)
🔹 Working Voltage Range
✔️ MC: 4.8V ~ 5.5V ✔️ VU: 7.2V ~ 26.0V (Recommended: 2S ~ 6S LiPo)
🔹 Power Consumption
✔️ Max: 1.5W (0.3A @ 5V) ✔️ Normal: 0.6W (0.12A @ 5V)
🔹 Operating Temperature
-10°C ~ 50°C
🔹 Assistant Software System Requirement
Windows XP SP3 / Windows 7 / Windows 8
✈ Flight Performance
📍 Hovering Accuracy (GPS Mode): ✔️ Vertical: ±0.8m ✔️ Horizontal: ±2.5m
📍 Max Yaw Angular Velocity
200°/s
📍 Max Tilt Angle
45°
📍 Ascent/Descent Rate
±6m/s
🔧 Hardware Features
🔹 Built-in Functions: ✔️ Three Flight Modes (Autopilot, Enhanced Fail-Safe, Low Voltage Protection) ✔️ S-Bus Receiver Support ✔️ 2-Axis Gimbal Support
📏 Specifications
📌 Weight: ✔️ MC: 25g ✔️ VU: 20g ✔️ GPS: 21.3g
📌 Dimensions
✔️ MC: 45.5mm x 31.5mm x 18.5mm ✔️ VU: 32.2mm x 21.1mm x 7.7mm ✔️ GPS & Compass: 46mm (Diameter) x 9mm
📌 Operating Voltage
✔️ MC: 4.8V ~ 5.5V ✔️ VU: 7.2V ~ 26.0V (Recommended: 2S ~ 6S LiPo)
📌 Power Consumption
✔️ Max: 1.5W (0.3A @ 5V) ✔️ Normal: 0.6W (0.12A @ 5V)
📌 Operating Temperature
-10°C ~ 50°C
📦 📦 Shipping Details
📌 Shipping Weight: 0.1 kg
📌 Shipping Dimensions
12 × 9 × 4 cm
🎁 Package Includes
✔️ 1x DJI NAZA-M Lite V1.1 with GPS Kit
📦 Kit Contents
✔️ 1x DJI Naza Controller Unit
✔️ 1x DJI Remote LED Module for Coding & PC Interface
—
✔️ 1x DJI Power Module
—
✔️ 1x DJI USB to MicroUSB Cable (18 inches)
—
✔️ 1x GPS Module
—
✔️ 1x GPS Module Stand
—
✔️ 8x Servo Cables (5 Inches Each)
—
—